Resistive Touch Panel is widely used in industrial equipment in the form of HMI (Human Machine Interface) because it is resistant to noise produced by motors / generators in factories. Resistive Touch panel consists of layers of ITO - Film and ITO - Glass with spacer dot, which prevents the two layers connected to each other if not pressed. To activate the Resistive Touch Panel is done by pressing the ITO - Film until ITO on Film and ITO on Glass are connected (see picture). To do the pressing it can use fingers, stylus, gloves, or anything as long as pressure can occur. Touch Panel Resistive can only respond to one touch (Single Touch) Characteristics and advantages of Resistive Touch Panel : 1. Can detect any input (fingers, nails, gloves, pens, stylus, etc.) 2. Reliability of up to 10 million touches at the same point (4 Wire) and 35 million touch (5 Wire) 3. Available in sizes 3.8 inches to 21.3 inches 4. Resistant to noise that is generally produced by the motor / generator in the factory. 5. Additional layers are available such as anti-glare, anti-UV, overlay print etc. 6. Available Controllers that are compatible with OS Windows, Linux and Android